24 Hr Call out 07790709438
The INDUSTRIAL DOOR AND LOADING BAY SPECIALIST
OVer 30 years Experience Within the industrial door & Loading bay industry
07790 709438
Roller Shutter Doors
Roller Shutter Doors are constructed from rolled galvanised steel laths which can be solid steel, perforated or punched. They are easy to operate and extremely robust making them one of the most popular Industrial Doors on the market. They are able to withstand heavy usage and are typically used in Industrial premises such as warehouses, factories, distribution centres and industrial units. Each shutter is made to the customers requirements, custom built to fit any opening. They can be operated by either manual push up, chain operated or electrically operated 3 phase or single phase.  Should you not want the as standard galvanised finish, there are a vast number of plastisol colour coatings and powder coatings to choose from.
Specification
Doors constructed with highest quality components as follows:
Bottom Rails:
Rigid and robust inverted ‘T’ or ‘L’ section in galvanised steel to suit shutter width, formed to give rigidity to bottom of shutter curtain.
This section sits squarely down on to floor surface, requires no maintenance.
Side Guides:
Heavy gauge galvanised steel to suit shutter height, formed to give accurate lead to shutter curtain. Side guides supported on suitable angles. Windguides fitted to shutters over 4 metres as requested.
A periodical light greasing is sufficient to maintain easy operation where necessary.
Optional Extras Available:
Pressed galvanised metal hoods, facias and soffits. PVC astragal weather strip to underside of bottom rail.
Safety bottom rail incorporating ’stop’ on impact or ‘stop, pause and return’ on impact feature.
Optional Extras Available:
Pressed galvanised metal hoods, facias and soffits. PVC astragal weather strip to underside of bottom rail.
Safety bottom rail incorporating ’stop’ on impact or ‘stop, pause and return’ on impact feature.
SHUTTER CURTAINS:
Constructed from interlocking concave section galvanised steel lath in gauges to suit opening sizes. Rolls out of the way at the top of the opening.
The lath section is so designed to give maximum strength and incorporates a weather-proof feature. Galvanised finish. Requires no maintenance but can be painted after suitable treatment.
Bottom Rails:
Rigid and robust inverted ‘T’ or ‘L’ section in galvanised steel to suit shutter width, formed to give rigidity to bottom of shutter curtain.
This section sits squarely down on to floor surface, requires no maintenance.
Side Guides:
Heavy gauge galvanised steel to suit shutter height, formed to give accurate lead to shutter curtain. Side guides supported on suitable angles. Windguides fitted to shutters over 4 metres as requested.
A periodical light greasing is sufficient to maintain easy operation where necessary.
Optional Extras Available:
Pressed galvanised metal hoods, facias and soffits. PVC astragal weather strip to underside of bottom rail.
Safety bottom rail incorporating ’stop’ on impact or ‘stop, pause and return’ on impact feature.
Personnel Wicket Doors:
Integral wicket personnel pass door complete with safety interlock systems for roller shutter doors with electrical operation.
These are designed to suit specific installation requirements.
Electrical Operation:
With suitable 415 volt 3 phase Motor, flange mounted on the roller bracket incorporating traverse limits and emergency hand operation. Starter provided with ‘UP’, ‘DOWN’ and ‘STOP’ buttons. Including wiring and commissioning.
Available for all sizes of shutter, giving safe, effortless operation. The electrical gear is protected to IP55 and comes complete with thermal overload protection. Increased IP protection can be provided as required.
Roller Brackets:
Constructed from steel plates with fixed angles to securely support the shutter.
These can be adapted to different fixing requirements and carry the hoods where applicable.
End Locks:
Suitable end lock to lath profile, securely riveted.
End locks have dual purpose of preventing lateral movement of curtain and provide smooth movement in side channels. Wind end locks can be added on doors over 4 metres wide (optional extra).
Roller And Operating Gear:
Steel tube with reduction gear unit, operated by continuous hand chain. (Hand chain operated doors only).
The gear arrangement is designed to give easy, safe operation and incorporates oiling points where necessary.
Pole Operation:
Available up to 8M2 having ‘pull down’ pole and locking arrangements each side.
For the smaller openings, and require minimal servicing.
Fire Resistant Shutter:
Specifications giving 1, 2 or 4 hour fire rating protection. These are made to heavier gauge with special fittings. Other types of fire doors and shutters available for all types of application.
Fusible links can be fitted to allow the shutter to close automatically in the event of fire.
INstallation:
Normally includes two skilled erectors and site drilling. An adjacent power supply is required for hand tools. We do not include any builders work, unloading and placing near opening unless requested. We assume structure to receive the door to be firmly and suitably constructed.
We are available to undertake regular maintenance and repairs.
Maintenance:
Roller Shutter Doors should be regularly maintained and the maintenance period should be determined according to operating frequency and local conditions to which the door is exposed. In the absence of information to the contrary, we will assume that site locations are subject to normal climatic and environmental conditions when providing quotations.